Disinfection using chlorine and electrolysis in public swimming pools

Suggestions

Products

Requirements - Disinfection using chlorine and electrolysis in public swimming pools

Overview
Downloads

Advanced disinfection

In accordance with DIN 19643, chlorine gas, calcium hypochlorite and sodium hypochlorite are approved for disinfection purposes. The most commonly used solution is chlorine gas, but this brings with it a certain potential danger.

ProMinent supplies pre-assembled, automatic measuring, control and metering systems to accurately meter the amounts of chemicals needed. These systems continuously measure all hygiene auxiliary parameters and therefore guarantee consistently superlative water quality in public pools.

Maximum safety and efficiency for your water treatment

Electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary systems are a particularly attractive alternative for safe disinfection. By producing the disinfectant on-site, the systems remove the need to store and handle dangerous chemicals. The minimal use of chemicals also ensures environmentally-sound operation and reduced operating costs. ProMinent has a cost-effective solution for ensuring hygienically pure swimming pool water and providing maximum operating reliability for every size of swimming pool.

Downloads for Disinfection using chlorine and electrolysis in public swimming pools

Selected filters:

Matching downloads

Sort by Document type

A bis Z

Load more matches ...

No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Advanced disinfection

Maximum safety and efficiency for your water treatment

Downloads

Suitable products - Disinfection using chlorine and electrolysis in public swimming pools

Electrolysis System CHLORINSITU III

Output 100 – 10,000 g/h of chlorine

Ultra-pure or low-chloride and low-chlorate sodium hypochlorite requires specialist plant engineering. The electrolysis system CHLORINSITU III is the solution for you.

Electrolysis System CHLORINSITU III Compact

Output 25 – 50 g/h of chlorine

Generation of sodium hypochlorite solution for smaller swimming pools and pools.

Electrolysis System CHLORINSITU V Plus

Output 100 – 3,500 g/h of chlorine

Electrolysis systems of type CHLORINSITU V Plus generate ultra-pure chlorine gas directly on site and only need salt, water and electricity to do so. Peaks in demand can be covered by this system (Plus system). They are especially well suited to systems for disinfecting potable water, wastewater, process water and water in swimming pools and cooling towers.

Electrolysis System CHLORINSITU IIa 60 – 2,500 g/h

Output 60 – 2,500 g/h of chlorine

CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

Electrolysis System CHLORINSITU IIa XL

Output 5 – 45 kg/h of chlorine

CHLORINSITU IIa XL is the tubular cell electrolysis system for on-site production of large quantities of hypochlorite. Users cannot fail to be impressed by its ease of operation and outstanding efficiency combined with optimum process stability for the reliable disinfection of large volumetric flows.

Electrolysis System CHLORINSITU V

Output 100 – 3,500 g/h of chlorine

Electrolysis systems of type CHLORINSITU V take the place of the chlorine gas system in the swimming pool and only need salt, water and electricity to do so.