Immersion Fittings for Sensors
Your sensor is ideally accommodated in the immersion fitting. This fitting ensures optimum measuring conditions.
Product description
Immersion Assembly Type IMA-ICT 2
To hold one inductive conductivity sensor of type ICT 2.
Material | Fitting: Stainless steel 1.4404 |
Max. temperature | 125 °C |
Max. pressure | 10 bar |
Installation length | 1 m |
Immersion lance diameter | 70 mm |
Flange | Stainless steel flange DN 80 PN 16 |
Dimensions Table: Flange
| Flange | DN 80/PN 16 |
| Ø D | 200 mm |
| Ø K | 160 mm |
| Ø d2 | 8 x 18 mm |
| b | 20 mm |
| Ø a | 63.5 mm |
| Screws | M 16 |
Order no. | |
|---|---|
IMA-ICT 2 | 1023353 |
Adaptation to processes through flange installation in tank from top.
PP Immersion Assembly Type lPHa 1-PP
Immersion fitting for holding one sensor (e.g. pH, ORP) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is sized so that either pH or ORP transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 40 mm. Immersion depths of 1 and 2 m are offered, however customers can independently lengthen or shorten the immersion pipe. The fitting head contains two cable connectors; measuring lines of 3-7 mm diameter can be led out.
Note: Measuring lines are not included in the scope of delivery.
Material | Fitting: PP |
Max. temperature | 80 °C |
Pressure | Installation at atmospheric pressure |
Immersion depth | Max. 1, or 2 m; variable |
Immersion lance diameter | 40 mm |
Dimensions Table: Flange
| Fixed flange | DN 40 |
| Hole circle Ø K | 110 mm |
| Screws | 4 x M16 |
| Thickness d2 | 18 mm |
| Diameter Ø D | 150 mm |
Installation length | Order no. | |
|---|---|---|
m | ||
IPHa 1-PP | 1 | 1008600 |
IPHa 1-PP | 2 | 1008601 |
Other materials available on request.
FKM = Fluorine Rubber
Accessories for Fitting Type IPHa 1
Order no. | |
|---|---|
Immersion pipe mounting for IPHa 1-PP | 1008624 |
Clamped threaded connector with fixed flange DN 40 according to DIN 2642 for lPHa 1-PP | 1008626 |
Clamped threaded connector for welding connection for lPHa 1-PP | 1008628 |
Protective (weatherproofed) cover for assembly head for IPHa 1-PP | 1008630 |
Water-retaining basin for IPHa 1-PP | 1008632 |
PP Immersion Assembly Type lPHa 3 -PP
To hold max. three sensors (e.g. pH, ORP, temperature) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is dimensioned so that up to three pH, ORP or temperature transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 75 mm. Immersion depths of 1 and 2 m are offered, however customers can shorten the immersion pipe themselves. The fitting head contains four cable connectors; measuring lines of 3-7 mm diameter can be led out. Measuring lines are not included in the scope of delivery. Technical data as for fitting IPHa 1, except the immersion tube diameter is 75 mm.
Material | Fitting: PP |
Max. temperature | 80 °C |
Pressure | Installation at atmospheric pressure |
Immersion depth | Max. 1, or 2 m; variable |
Immersion lance diameter | 75 mm |
Dimensions Table: Flange
| Fixed flange | DN 65 |
| Hole circle Ø K | 145 mm |
| Screws | 4 x M16 |
| Thickness d2 | 18 mm |
| Diameter Ø D | 185 mm |
Installation length | Order no. | |
|---|---|---|
m | ||
IPHa 3-PP | 1 | 1008602 |
IPHa 3-PP | 2 | 1008603 |
Other materials available on request.
FKM = Fluorine Rubber
Accessories for Fitting Type IPHa 3
Order no. | |
|---|---|
Immersion pipe mounting for lPHa 3-PP | 1008625 |
Clamped threaded connector with fixed flange DN 65 according to DIN 2642 for lPHa 3-PP | 1008627 |
Clamped threaded connector for welding connection for lPHa 3-PP | 1008629 |
Protective (weatherproofed) cover for assembly head for lPHa 3-PP | 1008631 |
Water-retaining basin for IPHa 3-PP | 1008633 |
PVC Immersion Assembly Type ETS 1 P
Immersion fitting to hold one conductivity, Pt 100, pH or ORP sensor with SN6 plug-in head and PG 13.5 screw-in thread. In addition, a stainless steel rod is integrated as a liquid reference potential.
Sensor connector (inner) | SN6 connector |
Signal lead connector (outer) | Coax SN6 male connector |
Material | Rigid PVC |
Type of fitting | Clamping flange with mounting plate |
Immersion depth | Variable |
Max. temperature | 55 °C |
Order no. | |
|---|---|
ETS 1 P | 914950 |
Immersion Assembly Type TA-LM
To hold one conductivity sensor of type LM and LMP with M 28 thread for side fasting with pipe clips (2 contained in the scope of supply) or with union nut/collar bush/screw-in part for fastening in a tank cover.
Union nut and screw-in part are to supplied by the customer (standard parts).
Material | PP |
Max. temperature | 70 °C |
Enclosure rating | IP 65 |
Max. pressure | 5.0 bar |
Immersion lance diameter | 32 mm |
Pipe length | 890 mm |
Length | Order no. | |
|---|---|---|
mm | ||
TA-LM | 890 | 1020632 |
Headed bush d50 | - | 1020634 |
Extension tube 1000 | 910 | 1020633 |
Overview
Getting stuck in
We offer a range of immersion fittings for specific integration into processes. They hold potentiometric sensors or conductivity sensors and ensure optimum operating conditions for measurement.